LG GB270 User Manual page 28

Settings
• Change codes - Change
26
B270_India_0527.indd 26
the default phone number
you have set without
the unauthorized user's
knowledge. To enable the
ATMT, you go to Settings
> Security > Anti-theft
Mobile Tracker where you
turn the feature on.
NOTE: The default ATMT
code is "0000". You have
to enter the code before
configuring the ATMT
settings.
To configure the ATMT
settings, Select Number for
ATMT and press OK. Press
New and enter the ATMT
code and press OK.
your Security code, PIN
code, PIN2 code and ATMT
code.
Power save
(Menu > Settings >
Power save)
If you set Always on, you
can save the battery power
when you don't use the
phone. Choose to switch the
power save settings between
Always on, Night only or Off.
Resetting your phone
(Menu > Settings > Reset)
Use Reset to reset all the
settings to their factory
definitions. The options are
Reset Settings, Reset Phone
Memory and Reset All. You
need the security code to
activate this function. The
default number is "0000".
Viewing memory status
(Menu > Settings > Memory
status)
2009.5.27 7:1:6 PM