Makita XNB02 Instruction Manual page 8

► 1. Pusher lever
3. Insert a connected nails into the slit on the bottom
of the magazine.
► 1. Slit 2. Connected nail
4. Press the pusher button.
The pusher lever is unlocked and it holds the nails in
the magazine.
► 1. Pusher button
CAUTION:
Be careful not to place your finger
on the rail of the pusher lever when pressing
the pusher button. The pusher may hit your finger
strongly and cause injury.
NOTICE:
If the inserted connected nails remain
in the bottom of the magazine, pusher lever does
not return even if you press the pusher button.
Bring the connected nails into the magazine so that
the entire connected nails can be seen.
To remove nails, follow the installation procedures in reverse.
Nose adapter
fingers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before installing the nose adapter.
When firing nails on the material with easily-marred
surfaces, use the nose adapter. Put the nose adapter
on the front end of the contact element.
1
Make sure that the nose adapter completely covers the
front end of the contact element as illustrated.
1
2
► 1. Nose adapter 2. Contact element
You can store the nose adapter on the holder on the
magazine to keep it from being lost.
► 1. Nose adapter 2. Holder
1
Hook
waist belt. Dropping the nailer, which is caused by
the hook accidentally coming out of place, may cause
unintentional firing and result in personal injuries.
8 ENGLISH
CAUTION:
Always make sure that your
2
1
2
1
CAUTION:
Do not hang the hook from the