Bank Name - Russound ST2 Instruction Manual

ST2 TUNER PROGRAMMING
ST2 TUNER SETUP MENU

Bank Name

A custom name can be assigned to each of the
six banks of both Tuner 1 and Tuner 2.
1. Enter the Setup Menu by pressing and holding
the TNR SEL button.
2. Press MEM Up/Down until BANK NAME
appears on the tuner.
3. Press BAND.
4. Press the Tune Up/Down buttons to select the
Tuner #.
5. Press BAND to advance.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND. BANK NAME appears again.
Press and Hold
TNR SEL button
TNR TNR
SEL
SEL
MEM
NAME
Procedure
TNR
SEL
TUNER #
22
Bank Name Procedure
BANK
SOURCE
NAME
NUM
Procedure
Procedure
BANK
BANK #
NAME
Selects
character
Selects
character
position
Repeat
for each
character
in name
8. Press BAND to access the Bank Name entry
screen.
9. Press Tune Up/Down to select a character
and MEM Up/Down to change a character posi-
tion. Up to 12 characters can be entered one by
one. A blinking LED block indicates the place-
ment of the character being entered.
10. Press BAND when bank name is entered.
11. SAVE CHANGES will appear.
12. Press Tune Up/Down to select Yes or No.
13. Press BAND to save bank name. The Bank
Name menu returns to the Tuner # prompt to
name other banks, or press TNR SEL to exit the
Bank Name menu.
FACTORY
REGION
INIT
Procedure
Procedure
SAVE
CHANGES?
UPDATE SYSTEM
FIRMW INFO
Procedure Procedure
Setup
Menu