Advertisement
3. Add or Edit the Camera(s) in AlarmNet Direct
You will need the following information:
AlarmNet Direct account with user name and password.
Customer account number for the AlarmNet communicator or "Video Only" account.
MAC ID for each camera. The MAC ID is on the box and on the camera back.
1. Log into AlarmNet Direct.
https://services.alarmnet.com/AlarmNetDirect/
2. Click Show Programmed Devices GSM/I.
3. Determine the type of customer account to add the camera:
For customers with no AlarmNet accounts – create a "Video Only" account, and add
the end user. Then go to STEP 4 to add the new camera.
For customers with an existing "Video Only" account – go to STEP 4 to add the new
camera.
For customers with an existing AlarmNet GSM or Internet communicator account –
ensure the account number is green (registered) and the Has Remote Service Capabilities
icon is present. Then go to STEP 4 to add the new camera.
Account number must
be green. (registered)
NOTE: If the account is not properly configured, refer to the online help and configure
the account.
4. In the Actions column, use the drop-down menu to select Video-Configure. Then click GO.
Ê800-082269Š
800-08226 1/11 Rev. A
Must have.
Honeywell is a registered trademark of Honeywell International Inc.
Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other countries.
QuickTime is a registered trademark of Apple Inc., registered in the U.S. and other countries.
Copyright 2011 Honeywell International Inc.
5. From this screen you can add a camera by entering the VIDEO MAC ID (located on the box
and on the back of the camera).
6. In the Video Device Name field, enter a friendly name for the camera such as; kitchen, porch,
garage, etc.
7. Click Add Video Device.
NOTE: You can also edit an existing camera by clicking Edit/Delete in the Action column. This
will allow you to change the Video Device Name, or simply delete that camera.
8. Save and close, then log out of AlarmNet Direct.
The cameras are now ready for customer use.
Have the customer log into their Total Connect account to view the video.
If their PC does not have QuickTime® and Flash® Player, you will be prompted to install or
update these applications.
If any of the cameras were mounted upside down, there is a setting to upright the image.
At this time the location of each camera can be adjusted for the desired view.
When adding, editing, or deleting a camera, the customer will receive email notification.
For detailed camera operation refer to the Total Connect online help guide for iPCAMs.
TRADEMARKS
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
www.honeywell.com/security
The last 6 digits of the MAC ID is also on
the back of the camera.
WARRANTY
For the latest warranty information go to:
http://www.security.honeywell.com/hsc/resources/wa/
Advertisement
