Repairs
6.12
Removing / installing drum bearing
Graphic 14: Drum bearings
1
Drum shaft
2
Inner and outer raceway
3
Bearing block
Prerequisite:
•
Worktop has been removed.
•
Outer and inner process air cover has been removed.
2013-10-23 / DIS 113_58300000133444_ara_en_l
4
Bolts
5
Retaining ring
6
Bearing cover
Repair Instructions Laundry Repair Instruction;T22
6.12.1
Removing drum bearing
1. Remove screws (4) from the cover.
2. Remove bearing cover (6).
3. Remove retaining ring (5).
4. Remove outer raceway (2).
5. Remove screws (4) from the drum bearing (3).
6. Raise drum.
7. Take drum bearing out of the appliance.
6.12.2
Installing drum bearing
► Install drum bearing in reverse order.
Page 34 of 35