Table of Contents
Advertisement
DC Inverter Duct Type Unit
the drain port to withstand additional force.
b. When multiple drain hoses are used, their installation should be performed as shown in the
figure below.
4.5.2 Testing of Drain Piping
After piping work is finished, check if drainage
flows smoothly.
As shown in the figure, add approximately
1liter of water slowly into the drain pan and check
drainage flow during COOL running.
4.6 Installation of the Duct
4.6.1 Dimensions of the Supply Air Outlet/Return Air Inlet
Fig.31
Fig.32
21
Fig.34 Supply Air Outlet
B
20
Fig.33
Advertisement
Table of Contents
