Philips AJ3200 Quick Start Up Manual page 2

Charge your mobile devices
1
Connect the clock radio with your mobile device.
• For Android-powered mobile device with a micro USB socket: use the supplied cable to connect the product with the mobile device;
• For Apple device with a lightning or 30-pin connector: use the charging cable of the Apple device (not supplied) to connect the product with the mobile device.
2
Connect the clock radio to AC power.
» The mobile device begins to charge.
AJ3200_05_QSG_V5.0.indd 2
Note:
• You can only set the alarm in standby mode.
• Make sure that you have set the clock correctly.
Specifications
Amplifier
Total Output Power
Tuner (FM)
Tuning Range
Tuning Grid
Sensitivity
- Mono, 26 dB S/N Ratio
Total Harmonic Distortion
Signal to Noise Ratio
General information
AC Power (power adapter)
USB Charging Voltage
USB Charging Current
Operation Power Consumption
Standby Power Consumption
Dimensions:
- Main Unit (W x H x D)
Weight:
- Main Unit
Press SLEEP repeatedly to select a period (in minutes). After the set period, the
product switches to standby mode automatically.
• To deactivate the sleep timer, press SLEEP repeatedly until [OFF] is displayed.
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine minutes
later.
Press AL1 or AL2 repeatedly to select an alarm source
(FM radio or buzzer) or deactivate the alarm timer.
500 mW
87.5-108 MHz
50 KHz
<22 dBf
<3%
>50 dBA
Brand name: Philips;
Model: S012B0551500B;
Input: 100-240V~ 50/60Hz max. 400mA
Output: 5.5 V 1500mA
DC 5 V
≤ 1000 mA
9 W
<1 W
112 x 101 x 125 mm
0.4 kg
6/6/2017 4:22:52 PM