Error Messages And Error Locator - Canon F-730SX User Manual

Error Messages and Error Locator

The calculator is locked up while an error message is shown on the
display to indicate the cause of the error.
Press
Error Message
ARUGMENT
Error
DIVIDE BY 0
Error
DOMAIN
Error
FRQ DOMAIN
Error
OVERFLOW
Error
STAT
Error
SYNTAX
Error
to clear the error.
Cause
Improper use of an argument
An attempt to perform a calculation divided by 0
Or in STAT mode, no. of input data ≤ 1
• An attempt to perform a illogical operation
For example:
• log x or ln x, x=0
• tan x, x=90º, –90º, 270º, –270º, 450º, –450º, etc.
• x!, x is not an integer ≥0
• nCr or nPr: n and r are not an integer ≥0
In STAT 1-VAR mode, FRQ value is not an integer
or 0< or >99
An attempt to perform a calculation using a value
that exceeds the allowable input range
Or calculation result is outside the allowable
calculation range
In STAT mode, no defined data points after
pressing
Or in mode other than STAT mode, press
or
2nd
An attempt to perform a problematic format of
the calculation
For example:
• Misplaced functions, parentheses or commas
.
11
,