Advertisement
Quick Links
MA1708-EB
© 2017 CASIO COMPUTER CO., LTD.
Be sure to keep all user documentation handy for future reference.
Your watch may differ somewhat from the one shown in the illustration.
Stopwatch Minute Hand
Second Hand
Stopwatch Second Hand
Stopwatch functions
To adjust the time setting
When the second hand is at
12 o'clock, pull the
Click 2.
Rotate the
to change the
Crown
time setting.
Push the
back in on a time
Crown
signal to resume timekeeping.
Note
Take care that you set the correct AM
or PM time.
When changing the time, move the
minute hand four or five minutes past
your final setting, and then back it up
to the setting you want.
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼ mark.
Operation Guide 5546
Stopwatch 1/10-Second Hand
Hour Hand
Minute Hand
A
Click 1
B
Crown
Day Indicator
To change the day indicator setting
Pull the
out to Click 1.
Crown
out to
Crown
Rotate the
away from you
Crown
to set the day.
Push the
Crown
back in.
Note
The day indicator setting uses a
31-day month. Make adjustments for
months of shorter lengths.
Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly
at midnight.
Current
Using the Stopwatch
The stopwatch measures elapsed time in 1/10-second increments up to 59 minutes,
59.9 seconds.
Elapsed time
A
Start
Click 2
Important!
Do not operate the stopwatch with the crown pulled out.
Note
An elapsed time operation will stop automatically at the end of 60 minutes.
Correcting the 0 Positions of the Hands
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Pull the
Crown
out to Click 2.
Press A to move the
Holding down A will move the hand at high speed.
Press B to move the
Holding down B will move the hand at high speed.
The
Stopwatch Minute Hand
After all of the hands are the way you want, push the
Important!
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
Specifications
Accuracy at normal temperature: ±20 seconds a month
Stopwatch: Measuring Capacity: 59'59.9" (60 minutes)
Measuring Unit: 1/10 second
Measurements: Elapsed time
Battery: One silver oxide battery (Type: SR920SW)
Battery Life: Approximately 3 years (60 minutes stopwatch operation per day)
Specifications are subject to change without notice.
Crown
Loosen
Start
Elapsed time
A
A
A
Stop
Resume
Stop
clockwise.
Stopwatch 1/10-Second Hand
clockwise.
Stopwatch Second Hand
is synchronized with the
Stopwatch Second Hand
Crown
B
Reset
.
back in.
1
Advertisement
