Advertisement
Quick Links
Lithium-Ion Battery Pack Installation Instructions
Description
The Lithium-Ion Battery Pack allows you to use FreePlay
without the need to be plugged in or wasting money on
expensive batteries. Additionally, when not in use, simply
recharge the Lithium-Ion Battery Pack using FreePlay's power
cord.
FreePlay Kickstand (Part No. 2043880-00) contents:
Part No.
Quantity
2043880-00
1
2045707
1
Required Tools (not included):
Flathead screwdriver
Safety First!
Before installing and using this product, please read these
instructions carefully and keep them on hand for future reference.
Failure to follow the precautions may result in damage, injury,
or even death.
1. WARNING: The battery (battery or batteries or battery pack)
shall not be exposed to excessive heat such as sunshine, fire
or the like.
2. CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
3. No open flame sources, such as lighted candles, should
be placed on the apparatus.
WARNING: When installing this product, always respect
the safety standard. Do not install the product in any way
that is not described in these instructions.
Power
Receptacle
C
LOUD Technologies Inc. • 16220 Wood-Red Road NE
Woodinville • WA • 98072 • 800/258-6883
Outside the U.S. call 425/487-4333 • FAX 425/487-4337
Disclaimer:
LOUD Technologies Inc. continually engages in research related to product improvement. New material,
production methods, and design refinements are introduced into existing products without notice as a routine
expression of that philosophy. For this reason, any current LOUD Technologies Inc. product may differ in
some respect from its published description, but will always equal or exceed the original design specifications
unless otherwise stated.
Part No. SW1102 Rev A 03/15
© 2015 LOUD Technologies Inc. All Rights Reserved.
Description
Lithium-Ion Battery Pack
Printed Instruction Sheet
A
A
Battery Cover Removal
In order to install the Lithium-Ion Battery Pack, the battery cover
™
must be removed first.
1. Using a flathead screwdriver, rotate the two locking tabs
counter-clockwise until they unlock and "pop" up.
2. Remove the battery compartment cover and set it aside.
Battery Pack Installation
Once the battery cover (and all batteries, if applicable) have been
removed and set aside, it's time to attach the battery pack.
NOTE: Do not force the battery pack into place. There is
only one way it fits and there should be no resistance during
installation.
1. Line up the four circular feet ("A"), two rectangular support
braces ("B") and power connector ("C") of the battery pack with
their respective counterparts on the FreePlay.
B
B
2. Replace the battery cover and lock it to the FreePlay by
rotating the two locking tabs clockwise until they lock into place.
NOTE: When not in use, recharge the Lithium-Ion Battery Pack
by plugging the FreePlay's power cord into the power receptacle
of the battery pack. The battery pack will also charge while inside
a plugged in FreePlay unit.
A
A
B
C
Advertisement
