Canon imageClass LBP162dw User Manual page 204

<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 10 to 60 (min.)
<Menu>
Termination>
<Access Point Mode Settings>
Configure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the
same time, you need to configure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID>
<Use Custom Network Key>
<Off>
<On>
<Network Key>
<Menu>
Settings>
key
<IP Address Settings for Direct Conn.>
Specify an IP address for using Direct Connection.
<Menu>
Conn.>
<Easy Connection via PC>
Start Easy Connection via PC (cableless setup mode). This allows you to use Canon Laser NW Device Setup Utility on
your PC to configure network settings.
Setting Menu List
<Network Settings>
Enter the time
<Network Settings>
<Use Custom SSID>/<Use Custom Network Key>
<Apply>
<Network Settings>
Enter the IP address
<Direct Connection Settings>
<Direct Connection Settings>
<Direct Connection Settings>
<Apply>
199
<Time Until Direct Connection
<Access Point Mode
<On> Enter the SSID/network
<IP Address Settings for Direct