Linksys MNFSPA2100 User Manual

Package Contents
• MNFSPA2100 VoIP ATA
• 5 V Power Adaptor
• RJ-45 Ethernet Cable
• MNF Welcome Guide
• Quick Installation Guide
Analogue telephone Adaptor
Quick Installation Guide
Voice
Model No. MNFSPA2100
Model No.
Before You Begin
Please note the MNFSPA2100 is pre-configured with the MyNetFone service.
Make sure you have the following:
• An active Internet connection
• A cable/DSL modem/router
• An analogue telephone or fax machine with an RJ-11 phone cable
• A PC will be required for the initial setup of your Internet connection.
1
Connect the ATA
A
Power off your network
devices, inclucing your
modem/router and PC.
B
Connect one end of the
telephone cable to the
ATA's PHONE 1 port.
Connect the other end to
your analogue telephone
or fax machine.
B
IMPORTANT: Do not connect the
PHONE port to a telephone wall jack.
Make sure you only connect a
telephone or fax machine to the
PHONE port. Otherwise, the ATA or
the telephone wiring in your home
or office may be damaged.
C
Repeat Step B with the
PHONE 2 port if you have an
additional telephone or fax
machine to connect.
D
Connect one end of an
Ethernet network cable
(included) to the ETHERNET
port of the ATA. Connect
the other end to the
Ethernet port of your PC.
D
E
Connect one end of a
different Ethernet network
cable to the INTERNET port
of the ATA. Connect the
other end to your cable/DSL
modem/router.
E
F
Power on the cable/DSL
modem/router.
G
Connect the included
power adapter to the
ATA's power port, and then
plug the power adaptor into
an electrical outlet.
H
G
Power on your PC.
Please proceed to
step 2
NOTE:
Make sure your PC's
Ethernet adapter is set to obtain an IP
address automatically. For more
information, refer to Windows Help.
2
C C onfigure the Phone Adapter
A
Launch the web browser on
the PC.
B
Enter http://192.168.1.1/
in the Address field
(192.1681.1 is the default
local IP address of the ATA).
Then press the Enter key.
C
The Router - Status screen
will appear. Click the WAN
C
Setup tab.
D
Proceed to the appropriate
instructions for your Internet
Connection Type: DHCP ,
Static IP , or PPPoE.
DHCP
Select DHCP for the
Connection Type.
D
Please note the following connection types:
DHCP: Use this connection for Cable
Broadband if the MNFSPA2100
connects directly to an existing router.
Static IP: Assign your own private IP address to
the MNNSPA2100. Suitable if
connecting to an existing router.
PPPoE: Connect the MNFSPA2100 directly to
the DSL modem.
3 Click Submit All Changes.
Static IP
Static IP
Select Static IP for the
1
Connection Type.
2 In the Static IP Settings
section, enter the IP
address in the Static IP field,
the subnet mask in the
NetMask field, and the
default gateway IP address
in the Gateway field.
3 In the Optional Settings
section, enter the DNS
server address(es) in the
Primary DNS and optional
Secondary DNS fields.
Click Submit All Changes.
4
PPPoE
PPPoE
1 Select P P PPoE for the
Connection Type.
2 Enter the user name in the
PPPoE Login Name field,
and enter the password in
the PPPoE Login Password
field.
Click Submit All Changes.