Connectivity; Display Settings; Time And Date - Sharp SE-02 User Manual

Select a profile and tap Options> Customize to set the
desired ring tones and alert types.
Tone settings: Set the ring tones of incoming calls and
messages. You can also select different types of ring
tones for power on/off.
Volume: Adjust the volume of ring tones and key tones.
Alert type: Select an alert type (Ring only, Vib. only,
Vibrate and Ring, Vibrate then ring).
Ring type: Select a ring type (Single, Repeat,
Ascending).
Extra tone: Allows you to turn the Warning, Error, Camp
on and Connect" tones on/off.
Answer mode: Allows you to turn if you can answer call
by any key.

17.2 Display settings

You can set display settings such as Wallpaper, Screen
Saver by tapping Settings > Display.

17.3 Time and date

You can set the time, time zone and format by tapping
> Settings > Phone settings > Time and date.
17.4 Language
You can set the menu language by tapping
Phone Settings > Language.
17.5 Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN
code each time the phone is switched on. Your PIN code is
stored on the SIM card and you should have been made
aware of the code when you purchased the SIM card.
Contact your service provider for further details.
Settings > Security settings >SIM lock
Select "On" to enable the PIN code. Select "Off" to
disable it.
Enter your PIN code.
17.6 Change Handset Code (Handset lock)
The default handset code is "0000".
Settings > Security settings > Change password >
Phone password
Enter the old handset code.
Enter a new handset code.
Enter the new handset code again.
Note: This is the standard main menu layout. Your phone's
menu may be different.

18. CONNECTIVITY

18.1 Bluetooth
By configuring the settings in this menu, you can use
Bluetooth wireless technology to connect to PCs, as well as
Settings >
to Bluetooth enabled phones.
26 of 33