Operation Modes; Standby Mode - Tripp Lite S3M100KX Owner's Manual

6. Operation Principles

6.2 Operation Modes

This UPS is a 3-phase, four wire on-line, double-conversion and reverse-transfer UPS that permits operation in the following modes:

• Standby Mode

• Line Mode
• Battery Mode
• Bypass Mode
• Converter Mode
• ECO Mode
• Shutdown Mode
• Maintenance Bypass Mode (Manual Bypass)
6.2.1 Standby Mode
The UPS will enter Standby Mode (if BYPASS is disabled) until the UPS is turned on. When the UPS is powered on in Standby Mode, the
charger function will be active when the battery is connected. The load is not powered under this mode.
Single
Input
Main
Input Breaker
Bypass
Dual
Inputs
Main
Q4
Maintenance Breaker
STS
Rectifier
Q1
Battery Breaker
Q4
Maintenance Breaker
Q2
Bypass Breaker
Rectifier
Q1
Input Breaker
Battery Breaker
Standby Mode Diagrams
Inverter
Inverter
Relay
STS
Inverter
Inverter
Relay
45
Load
Q3
Output Breaker
Load
Q3
Output Breaker