Table of Contents
Advertisement
8.15.14 Displaying / changing process user parameters
1-
With the dryer stopped (STANDBY) or operating (ON mode), press the
button to access the dryer's menu of functions.
2-
Press the
button to display the list of process user parameters and
respective current settings.
3-
Scroll through the list of parameters using the
4-
Touch the screen on the parameter to be changed to display the possible
settings (see user parameter table), then select one of the settings. If the
parameter to be changed requires a numerical value, set the new value using
the numerical keypad within the max and min limits shown.
5-
Confirm the setting or numerical value entered using the
press the
button to return to the parameter list without making any
changes. Repeat operations 3-, 4-, 5-, for all parameters to be changed.
6-
Press the
button to return to the previous screen at any time.
7-
Press the SW tab to show the firmware version of DMC50 electronic control
unit. All other functions included in the SW tab screen are password protected
and they do not contain user functions.
8-, 9-
Buttons
protected operations. They do not contain user functions.
DRYPOINT® RA 5400-10800 eco
are reserved for technical/diagnostic password-
buttons.
button or
2-
Technical description
1-
7-
3-
4-
9-
8-
6-
5-
25
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
