Download Print this page
Motorola FX7400 Series Quick Start Manual
Motorola FX7400 Series Quick Start Manual

Motorola FX7400 Series Quick Start Manual

Rfid readers
Hide thumbs Also See for FX7400 Series:

Advertisement

Quick Links

Introduction
FX7400 Series readers provide real time, seamless tag processing
for EPC Class1 Gen2 compliant tags. This Quick Start Guide
provides information about installing and connecting the reader. For
more information refer to the FX Series RFID Readers Integrator
Guide, available at
http://supportcentral.motorola.com
Reader Installation
Unpack the reader.
1.
Set up the reader and tags on a desktop.
2.
Connect the antenna to antenna Port 1.
3.
Port 1
Port 2
Antenna Port 1
Connect the Ethernet cable to the Ethernet port.
4.
Connecting the reader to a subnet that supports DHCP is
recommended. This installation procedure is not guaranteed to
work if DHCP is disabled in the reader and if the reader is
connected directly to a PC.
GPIO
10/100BaseT Ethernet Port
(with POE)
Connect the AC power supply to a power outlet and connect to
5.
the power port.
NOTE This step is not required for networks supporting
Power-over-Ethernet (POE).
The green power LED remains lit after successful installation.
Port 3
Port 4
24 VD
Power
FX7400 SERIES
RFID READER
QUICK START GUIDE
© 2011 Motorola Solutions, Inc. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability,
function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Motorola products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in
Motorola products.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are
used under license. All other trademarks are the property of their respective owners.
Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
http://www.motorolasolutions.com
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty
Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo
are trademarks or registered trademarks of Motorola Trademark Holdings,
LLC and are used under license. All other trademarks are the property of
their respective owners.
© 2011 Motorola Solutions, Inc. All rights reserved.
72-154246-01 Revision A — July 2011

Advertisement

loading

Summary of Contents for Motorola FX7400 Series

  • Page 1 GPIO 24 VD Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used.
  • Page 2 If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the Open a browser. Recommended browsers are IE6, IE7, IE8, or equipment, they will contact Motorola Solutions Support at: Mozilla 3. http://supportcentral.motorola.com...