Page 1
Model: T030-50M Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com/support Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com/support Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind.
Safety Instructions Prevent Eye Damage and Personal Injury • Carefully read all safety information and instructions before using the product • Use product only as specified • Do not use around explosive gas, vapor or in wet/damp environments • Discontinue use of product if it does not operate correctly or is damaged •...
LCD Screen Laser On Lord Measurement Display Measurement of Edge Delay Measurement Lofting Function Distance Measurement Battery Condition Instructions of Area, Volume, Pythagorean (Indirect) Data Storage Measurement Quantity of Data Storage Measurement Unit and m Included) Signal Strength Auxiliary Display 17-07-266-9336DE-EN.indd 5 8/22/2017 8:44:12 AM...
Battery Installation Note: Use only 1.5V AAA alkaline batteries. Open the battery door on the back of the device and insert the included (x2) AAA batteries according to the correct polarity. Close the battery door. Batteries should be replaced when the icon flashes in the display.
Operation On/Off Function 1 To turn on the device, press . Press again to activate the laser. 2 To turn off the device, press and hold for 3 seconds. 3 When the device is on but not in use, the backlight will shut off within 15 seconds.
Operation Volume Measurement Turn on the device and activate the laser. Once the laser is activated, press twice for the screen to display the icon. One of the cube icon’s edges will flash. When this happens, do the following: 1 Press to measure the first edge (length).
Page 9
Operation 2 Turn on the device and activate the laser. Once the laser is activated, press four times for the screen to display the icon. In the icon, the top triangle’s hypotenuse will flash. Press to first measure the length of the (a) dotted line of triangle.
Operation Lofting 1 Turn on the device. Press and hold for 2 seconds. 2 Designate the a value (initial distance from the target) and b value (spacing interval distances) by using (to move digits) and (to adjust digit values). 3 Once values are set, place the meter on a flat surface and near the wall. Press to activate the laser.
Operation Measurement Benchmark Setting Press to switch between front benchmark and end benchmark functions. The meter takes the end benchmark as its default. Front Benchmark End Benchmark Function Setting Switch 1 Press and hold until the icon flashes. 2 Press the keypad keys to select the mode you want to use. Battery Power The meter’s battery power is at full capacity when the icon displays all...
Bring meter to cooler temperature Data Overflow Measure again Weak Signal Test strong reflection ability of target Strong Signal Test weak reflection ability of target Hardware Error Restart Contact Tripp Lite Tech Support if meter continues to fail 17-07-266-9336DE-EN.indd 12 8/22/2017 8:44:13 AM...
Specifications Measurement Distance Up to 50 m (165 ft.) Measurement Precision +/- 1 mm Unit Options Meters/inches/feet Test Time 0.1 to 3 seconds Laser Time II & 635nm, <1mw Automated Calibration Precision Continuous Measurement Area Measurement Pythagorean Measurement Add and Subtract Measurement Y (Length/area/volume) Max &...
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll automatically be entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Page 15
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. 17-07-266-9336DE-EN.indd 15...
Page 16
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 17-07-266 93-36DE_RevA 17-07-266-9336DE-EN.indd 16 8/22/2017 8:44:13 AM...