Assemble The Lower Base; Unpack The Grill; Assemble The Base Cart - GE JGGR27 Assembly Instructions Manual

NOTE TO ASSEMBLER
To aid assembly, all parts in bold type in the following
assembly steps match the illustrations shown in the
PARTS INCLUDED section.
1

UNPACK THE GRILL

• Carefully cut open the box, remove
the contents and group like parts together.
2

ASSEMBLE THE BASE CART

Push Nut (2)
1. Hammer a push nut onto the
end of the axle rod.
2. Slide a wheel onto the axle rod.
Wheel (outside
of wheel against
push nut)
3. Slide the base
Wheel
cart onto the
(outside
axle rod.
of wheel
Hammer a
against
push nut onto
push nut)
the end of the
axle rod.
Base cart
Block of
wood as
protective
base
Assembly Instructions
Axle rod
Push nut
Block of
wood as
protective
base
Push nut
Axle rod
3

ASSEMBLE THE LOWER BASE

1. Peel off the protective shipping film from the front
panel, if present.
2. Stand the side panels on end with the bolts at the
top. Stand the front panel on end with the cutouts
at the top.
Bolts
at top
3. Hook the front panel screw heads (4) into the
keyhole slots on the side panels.
Bolts
at top
4. Push the front panel down so that the screw heads
slide into the lower neck of the keyhole slots.
Tighten the screws to lock the panels in place.
Side
panel
Tighten screws
3
Cutouts
at top
Side
panels
Front
panel
Cutouts
at top
Side
panels
Front
panel
Front
panel