GE 169 Instruction Manual page 10

1 INTRODUCTION
RTD Inputs
10 Ω copper
sensor types:
100 Ω nickel
120 Ω nickel
100 Ω platinum (specified with order)
display accuracy:
trip/alarm setpoint range: 0 to 200°C
dead band:
maximum lead resistance:
Relay Contacts
type: form C
rated load: 10 A @ 250 VAC / 10 A @ 30 VDC (resistive load)
7.5 A @ 250 VAC / 5 A @ 30 VDC (inductive load)
0.5 A @ 125 VDC (resistive load)
0.3 A @ 125 VDC (inductive load)
maximum operating voltage:
maximum operating current:
minimum permissible load:
NOTE: AC inductive load PF = 0.4
DC inductive load L/R = 7 msec.
Analog Current Output (4-20 mA standard)
output:
maximum load resistance:
maximum output (saturation):
accuracy:
polarity:
Control Power
AC nominal: 120 VAC, range: 90-150 VAC
240 VAC, range: 180-270 VAC
frequency: 50/60 Hz
maximum power consumption:
DC nominal: 24 VDC, range:
48 VDC, range:
125 VDC, range: 80-150 VDC
250 VDC, range: 160-300 VDC
maximum power consumption:
Environment
operating temperature range:
display operational range:
±2 C
3°C
25% of RTD 0°C resistance
380 VAC, 125 VDC
10 Amps
5 VDC, 100 mA
4-20 mA /
300 Ω
20.2 mA
±1% of full scale reading
terminal 58 ("-") must be at ground potential (ie. output is not isolated)
40 VA
20-30 VDC
30-55 VDC
30 W
–10°C to +60°C
0°C to +55°C
0-20 mA / 0-1 mA
300 Ω 2000 Ω
20.2 mA 1.01 mA
5
g
GE Power Management