JVC KD-AV7005 Service Manual page 24

3.4.2 Removing the top cover
(See Fig.2)
(1) Remove the two screws C attaching the top cover on the
back of the body.
(2) Remove the top cover upward.
Reference:
When reassembling, set part b of the top cover under the
bending part c of the chassis frame.
3.4.3 Removing the mechanism section
(See Figs.2 to 4)
• Remove the top cover.
(1) Remove the two screws D attaching the right and left stop-
pers on the front side. (See Fig.2.)
(2) Remove the two floating springs on the bottom of the body.
(See Fig.3.)
(3) Move the mechanism section upward and remove from the
chassis frame.
(4) The three damper springs (damper SP. (F) and damper
SP. (R)) come off from the dampers (damper(F) and damp-
er (R)). (See Fig.4.)
Caution:
• When reassembling, reattach the damper spring to the
damper respectively and insert the three shafts on the bot-
tom of the mechanism to the dampers.
• Before inserting the shaft to the dampers, apply IPA to the
hole of the dampers.
Top cover
DVD mechanism assembly
Stopper
D
Stopper
D
1-24 (No.MA101)
C
b
c
Chassis frame
Fig.2
Damper SP. (F)
(Silver)
C
Damper (F)
(Black)
Damper SP. (F)
(Silver)
Floating spring
Fig.3
Mechanism section
Damper SP. (R)
(Red)
Damper (R)
(Purple)
Chassis frame
Damper (F)
(Black)
Fig.4