Installing Caller Id; General Information - Samsung iDCS 100 Installation Section

iDCS 100
TECHNICAL MANUAL
PART 10. INSTALLING CALLER ID

10.1 GENERAL INFORMATION

In order to install Caller ID on a iDCS 100, you must have the following pieces of iDCS
100 equipment available:
A personal computer with the latest version of PCMMC for the iDCS 100 is recommended.
This will allow the original system database to be saved in the case of an upgrade to an
existing system.
The iDCS 100 is compatible with both types of Caller ID as defined by BELLCORE. These
are the single message format or "Number Only" sometimes referred to as standard Caller
ID and the multiple message format or "Name and Number" sometimes referred to as
Deluxe Caller ID. In the case of Number Only delivery, there is a translation table available
to add names to the delivered number.
The MMCs related to Caller ID are listed below with a short description of their use. They
are listed in the recommended order in which they should be programmed. This sequence
is suggested so that the installer gets a better understanding of how the feature works.
There is no technical reason to follow this sequence.
! MMC 414 CID TRUNKS
! MMC 312 ALLOW CID
! MMCs 722 and 723
! MMC 729 CID TRANSLATION
! MMC 725 SMDR OPTIONS
This MMC is used by the technician to determine
which trunks will receive Caller ID data.
This MMC is used by the technician to determine
which keysets are allowed to receive Caller ID
displays.
These MMCs have had new keys related to Caller
ID features added to them. It is strongly
recommended that all keysets allowed Caller ID in
MMC 312 are programmed with a CID key.
This MMC allows the technician to create a list of
names that correspond to numbers received from
the central office. These names will be displayed
when a call rings in that has Number Only data
provided by the CO.
The ability to print Caller ID data and abandoned
calls has been added to this MMC.
10.1
INSTALLATION
PART 10 JUNE 2002
Contents
HOME
PAGE
Table of