Direct Button Operation; Programme Guide; Info; Atv/Dtv/Radio Buttons - Sharp LC-50LE275X Operation Manuals

Direct Button Operation

ATV/DTV ATV/DTV
EPG EPG GUIDE

INFO

RADIO RADIO

Programme Guide

You can check the current channel list of DTV/ATV
respectively.
1
Press GUIDE to display the programme channel
list.
2
Press a /b to select your desired programme,
and then press ENTER.
3
Press RETURN or GUIDE to exit.
Info
While watching DTV you can check the extended
programme information on the screen using INFO
on the remote control.
General INFO screen
• Station name
• Title
• Date
• Time for the current programme
• Video system
• Audio system
• Parental rating
NOTE
• If there is more information, pressing a /b allows you to go
to the next page or return to the previous page.
• You can cancel this info by pressing INFO.
- 10

ATV/DTV/RADIO buttons

Use the following buttons on the remote control to
operate the menu.
HDMI HDMI
DISPLAY DISPLAY
ATV/DTV
EPG EPG GUIDE GUIDE INFO INFO RADIO
ATV/DTV: Press to switch between ATV and DTV
mode. After switching from ATV or DTV, radio or
external input mode to ATV and DTV mode, the TV
jumps to the most recently viewed ATV and DTV
channel.
RADIO: Press to switch from DTV to radio mode.
The TV will jumps to the most recently tuned radio
channel.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select "ATV" from
"Auto installation" in Programme setup menu.
(See page 5.)
2
After setting the channels, you can select a
channel using CHr/s or 0 – 9 on the remote
control unit. (See page 4.)
DTV (Digital TV)
When the TV accesses to DTV mode for the fi rst
time, you need to run the auto search. To scan all
available services in your area, follow the procedures
below.
1
To watch the DTV broadcasts, select "DTV" from
"Auto installation" in Programmme setup menu.
(See page 5.)
2
After setting the channels, you can select a
channel using CHr/s or 0 – 9 on the remote
control unit. (See page 4.)
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
ATV/DTV ATV/DTV
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
BBC1 BBC1
ATV ATV
PAL B/G PAL
NICAM STEREO
When receiving a bilingual signal
Each time you press MPX, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.
Bilingual mode
BBC1 BBC1
ATV ATV
PAL B/G PAL
NICAM CH A NICAM
BBC1 BBC1
ATV ATV
PAL B/G PAL
MONO NICAM
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
BBC1 BBC1
ATV ATV
PAL B/G PAL
NICAM MONO
B/G
MONO
B/G
CH B
B/G
CH AB
B/G
MONO