Removing And Installing The Panel; Checking The Spark Plug - Yamaha QBIX LTV125 Owner's Manual

Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
1
1. Panel A
Panel
To remove the panel
Remove the screws, and then pull the
panel out at the area shown.
Periodic maintenance and adjustment
EAU18752
1. Panel A
2. Screw
To install the panel
Place the panel in the original position,
and then install the screws.
EAU19253

Checking the spark plug

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.
To remove the spark plug
1. Remove panel A. (See page 9-7.)
2. Remove the spark plug cap.
3. Remove the spark plug as shown,
1
ZAUV0455
1. Spark plug cap
2. Spark plug
9-7
with a spark plug wrench available
at a Yamaha dealer.
2
EAUT2076
9