Philips BTB2462 Short User Manual

www.philips.com/support
Question? Question?
Contact
Contact
Philips Philips
Short User Manual
2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation
to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license from Koninklijke Philips N.V.
BTB2462_05_Short User Manual_V1.0
Note:
1
Press /PAIRING to select the Bluetooth source.
» The Bluetooth indicator flashes blue quickly. •
You can pair and connect a maximum of 3 devices to this
product at the same time.
2
On your device,search for Bluetooth devices that can be paired.
• If you fail to search for 'Philips BTB2462' or cannot pair with
3
Select 'Philips BTB2462' on your Bluetooth enabled device and if
this product, press and hold
necessary input '0000' as the paring password. to enter pairing mode.
» After successful pairing and connection, the Bluetooth indicator
turns solid blue, and the unit beeps twice.
4
Play music on the connected device.
BTB2462
Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
Wall Mounting Instructions
Short user manual
Store DAB+ radio stations automatically
Philips BTB2462
/PAIRING for three seconds
1
Press and hold CLOCK/SCAN for more than 3 seconds.
2
Press / to select an automatically store station.
Switch to standby mode
Switch to ECO standby mode
Select a folder.
/
Select an audio file.
/
Pause or resume play.
Stop play.
/MENU
MODE Select an available play mode.
•
[REPEAT ONE] (repeat one): repeat the
current track
•
[REPEAT ALB] (repeat album): repeat
tracks in the current album
•
[REPEAT ALL] (repeat all): repeat all
tracks
•
[SHUFFLE ON] (shuffle on): play tracks
randomly
•
[OFF] (off): play tracks in sequence
Store DAB+ radio stations manually
3
1
Tune to a DAB+ radio station.
2
Press PROG to activate the storing mode.
3
Press / to select a preset number.
4
Press PROG to confirm.
» The name of the preset station is displayed.
3
Repeat step 2-3 to set hour, minute, and whether to
synchronize the clock with an RDS radio or a DAB+
station that transmits time signals.
Use DAB+ menu