Casio DT-X100-10E Hardware Manual page 15

DT-X100 Hardware Manual
Item
Power Operating power
Memory backup
Operating period
Memory backup
period (with memory
backup battery only)
Memory backup
period (with battery
pack and memory
backup battery)
Battery pack charge
period
Memory backup
battery charge period
Specification
Lithium-ion battery pack (HA-F20BAT
or
HA-F21LBAT)
Lithium battery (rechargeable) on board
For Laser Scanner or Linear Imager
integrated models;
Approx. 15 hours (HA-F20BAT)
Approx. 26 hours (HA-F21LBAT)
For C-MOS Imager integrated models;
Approx. 13.5 hours (HA-F20BAT)
Approx. 23 hours (HA-F21LBAT)
For Laser Scanner or Linear Imager
integrated models;
Approx. 10 hours (HA-F20BAT)
Approx. 17 hours (HA-F21LBAT)
For C-MOS Imager integrated models;
Approx. 9 hours (HA-F20BAT)
Approx. 15 hours (HA-F21LBAT)
Approx. 10 minutes for RAM
Approx. 72 hours for RTC
Approx 72hours for RAM
Standard Battery Pack
Approx. 3 hours
Large Battery Pack
Approx. 5.5 hours
Approx. 4 days (for fully charged
level)
CASIO COMPUTER CO., LTD.
Remark
- Based on the ratio of cyclic operation
of "Standby: Key input: Scanning" at
20:1:1.
- Under the conditions that the CPU
speed is set to auto power save mode
and the backlight is turned off.
- Based on the ratio of cyclic operation
of "Standby: Key input: Scanning: WLAN"
at 20:1:1:1.
- Under the conditions that the CPU
speed is set to auto power save mode
and the backlight is turned off.
- Litium battery (on-board) is fully
charged.
- At room temperature
- The backup period starts when "Main
battery low warning" appears.
- Power of the terminal is turned off
while the batter is being charged.
- At room temperature.
- Power of the terminal is turned off
while the batter is being charged.
- At room temperature
- Battery pack is being installed in the
terminal.
- At room temperature.
P.15