BSR 2000 Installation Guide
Mounting the BSR 2000 in an Equipment Rack
The BSR 2000 provides rack-mounting brackets for mounting the unit in a standard
19-in. equipment rack.
Rack Mounting Options
You can choose from the following mounting options.
Before You Begin
Before you begin the rack-mounting procedures, make sure of the following:
Rack-Mounting Procedure
To mount the BSR 2000 in an equipment rack, perform the following tasks:
1. Mark the location on the rack where you intend to mount the BSR 2000
2. Attach the mounting brackets to the sides of the BSR 2000 chassis.
3. Mount and secure the BSR 2000 in its equipment rack.
The following sections describe these tasks.
Marking the Installation Location on the Equipment Rack
The BSR 2000 is a 1U-height device that is designed to straddle the 1/2-in. spaced
holes in a standard 19-in. equipment rack.
Using a pencil (or other erasable marker), mark the location on the rack where you
will mount the BSR 2000.
Attaching the Mounting Brackets
The BSR 2000 utilizes custom left and right mounting brackets, designed to maximize
airflow through the chassis to maintain proper cooling of the internal components.
The brackets are shown in
2-4
Front mount
Mid mount
You have all tools and other equipment required to complete the installation.
You are wearing an anti-static wrist strap or foot strap.
You choose a mounting option.
Figure
2-1.
MGBI
526359-001