Advertisement
Choosing Power Sources
To use the player on AC power source
Connect the supplied AC power cord to the AC IN jack.
1
to AC IN
2
to a wall outlet
To use the player on batteries
Insert six R20 (size D) batteries (not supplied) into the battery
compartment.
Notes
• To use the player on batteries, disconnect the AC power cord
from the player.
• Replace the batteries when the OPR/BATT indicator dims or
when the player stops operating. Replace all the batteries with
new ones.
WARNING
To prevent fire or shock hazard, do not
expose the player to rain or moisture.
Radio
Cassette-
Corder
Operating Instructions
This symbol is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature
CFS-W338
accompanying the appliance.
You are cautioned that any changes or
modifications not expressly approved in this
©1996 by Sony Corporation
manual could void your authority to operate this
Printed in China
equipment.
3-856-628-71(1)
For customers in Canada
To prevent electric shock, match wide blade of plug
to wide slot, fully insert.
Troubleshooting
There is no audio.
Deck B
• Connect the AC power cord
Erase head
securely.
• Insert the batteries properly.
Capstan
• Replace all the batteries if they
are weak.
• Unplug the headphones.
• Adjust the volume.
• Set FUNCTION to the position
Record/
you want to operate.
Playback head
Cassette cannot be
Pinch roller
inserted.
Cotton swab
Insert the cassette properly.
The r REC button does
not function.
• No cassette is in deck B.
• Make sure the safety tab on the
cassette is in place.
Poor playback,
recording or erasing
Deck A
Capstan
quality.
• Dirty heads. Clean the unit (as
shown) with a cotton swab
slightly moistened with
cleaning fluid or alcohol.
• Demagnetize the heads and all
Playback head
metal parts in the tape path
Pinch roller
with a commercially available
tape head demagnetizer.
Owner's Record
The model number is located on the bottom, and
the serial number is located in the battery
compartment. Record the serial number in the
space provided below. Refer to them whenever
you call upon your Sony dealer regarding this
product.
Model No. CFS-W338
Serial No.
Precautions
On safety/power sources
• Should any solid object or liquid fall into the player,
unplug the player, and have it checked by qualified
personnel before operating it any further.
• For AC operation, use the supplied AC power cord;
do not use any other type.
• The player is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if the player itself has been turned off.
• For battery operation, use six size D (R20) batteries.
• When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage
or corrosion.
• The nameplate indicating operating voltage, power
consumption, etc. is located on the bottom.
On placement/operation
• Do not leave the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
• Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed
for the player to operate properly and to prolong the
life of its components.
• Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or
spring-wound watches away from the player to
prevent possible damage from the magnet.
• If the player has not been used for a long time, set it
in the playback mode to warm it up for a few minutes
before inserting a cassette
If you have questions or problems concerning your
player, please consult your nearest Sony dealer.
Specifications
• Battery life
AUDIO POWER
FM Recording: Sony R20P:
SPECIFICATIONS
Approx. 12 hours/Sony LR20
POWER OUTPUT AND
alkaline: Approx. 24 hours
TOTAL HARMONIC
Playback: R20P: Approx. 7
DISTORTION:
hours/Sony LR20 alkaline:
Approx. 12 hours
With 3.2ohm loads, both
• Power requirements
channels driven, from 150–
Australian model: 230–240 V AC,
10,000Hz; rated 1.5 watts per
50Hz/Other models: 120 V AC,
channel minimum RMS power,
60Hz
with no more than 10% total
9V DC, six size D (R20) batteries
harmonic distortion in AC
• Power consumption
AC 14W
operation.
• Dimensions Approx. 540 x 159 x
• Frequency range
163 mm (w/h/d) ( 21
3
⁄
8
FM: 87.6–108MHz
inches) incl. projecting parts and
AM: 530–1,710kHz
controls, not incl. handle
• Antennas FM: Telescope/AM:
• Mass Approx. 3.5kg (7 lb 11 oz)
Built-in ferrite bar
incl. batteries
• Recording system 4-track, 2-
• Supplied accessory
channel stereo
AC power cord (1)
• Frequency response 80–10,000Hz
• Speakers Fullrange: 10cm
Design and specifications are
(4inches) dia. , cone type
subject to change without notice.
• Output Headphones jack(stereo
minijack), for 16–32 ohms
impedance headphones
• Power output (excluding the
USA model)
2.3W+2.3W (at 10% harmonic
distortion in DC operation)
x 6
3
⁄
x 6
1
⁄
8
2
Advertisement
