Block Mac Address - D-Link DSL-2642B User Manual

Section 3 – Configuration
To access Block MAC Address, point to the Parental Control on the left window and click Block MAC Address submenu, or click the Block MAC
Address button in the Parental Control window.
Use this window to deny access to specified MAC address.
Click Add to see the Time of Day Restriction section. MAC address is
a specially formatted text string (xx:xx:xx:xx:xx:xx) that uniquely
identification of a device. This section will allow users to block devices
with certain MAC addresses on the LAN.
To configure for MAC address blocking, enter the username into the
Username field, click Current PC's Mac Address to have MAC
address of current computer, or click Other MAC Address and enter a
MAC address manually. Click Schedule Rule or Manual Schedule
radio button to configure the time schedule. For Schedule Rule, select a
rule in the drop down list. Rules in the list can be configured in
Advanced -> Schedules. For manual Schedule configure as follows.
Use the radio buttons to click the desired Day(s), either All Week or
Select Day(s) (in which case you must tick the checkboxes for the
desired individual days of the week), select the desired Start Time and
End Time or tick the All Day – 24 hrs checkbox, and then click the
Block Website button.
Click the Apply button to see the configured URL blocking entry is
displayed in the Block Website.
To remove a Blocked URL entry in the table, click the corresponding
button. To modify a table entry, click the corresponding
the desired changes, and then click the Apply button.
D-Link DSL-2642B User Manual

Block MAC Address

button, make
61