If You Forget Your Passcode - Honeywell 5103S-5107S Operations & Installation Manual

ENTERING THE WRONG CODE
1. If you press a wrong key while entering your code, you may press "CLEAR" to reset prior
to pressing "LOCK" (Figure 1).
2. If you have entered the wrong code followed by "LOCK", the LED panel will display
(Figure 2).
Figure 1
SECURE LOCKOUT PERIOD
If a wrong code is entered 3 times in a row, the digital keypad will
begin a five-minute lockout period. During this period the LED will
display and the keypad will become disabled. Once the
lockout period has expired, the safe can be unlocked using the
active code.
NOTE:
You may use the Override Access Key to open safe, but keypad
will complete the full lockout period.

IF YOU FORGET YOUR PASSCODE

If you forget your passcode AND your key turns to the RIGHT:
1. Insert Override Key and turn to the right to unlock the safe.
2. With the key in the open position, press the "CLEAR" button and the LED will display
3. Turn the Override Key to the left and remove it from lock.
4. The safe will be unlocked after entering any 3-6 digit code followed by pressing the
"LOCK" button.
5. The safe is returned to normal operation. You may enter any new 3-6 digit code followed by
pressing the "LOCK" button.
If you forget your passcode AND your key turns to the LEFT:
1. Screen must be blank. Wait 30 seconds after pressing any key.
2. Insert Override Key and turn to the left to unlock the safe.
3. With the key in the open position, press the "CLEAR" button and the LED will display
4. Turn the Override Key to the right and remove it from lock.
5. The safe will be unlocked after entering any 3-6 digit code followed by pressing the
"CLEAR" button.
6. The safe is returned to normal operation. You may enter any new 3-6 digit code followed by
pressing the "LOCK" button.
4
Figure 2
.
.