Advertisement
Available languages
Available languages
ENGLISH GB
IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions before
starting to use the appliance. Keep this manual
in a safe place for future reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
• This appliance must only be operated as
instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance.
• Children of less than 3 years should be kept
away unless continuously supervised Children
aged from 3 years and less than 8 years shall
only switch on/off the appliance provided
that it has been placed or installed in its
intended normal operating position and they
have been given supervision or instruction
concerning use of the appliance in a safe
way and understand the hazards involved.
Children aged from 3 years and less than 8
years shall not plug in, regulate and clean the
appliance or perform user maintenance.
• CAUTION — Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.
• Never position this appliance immediately
underneath a power socket.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
•
DO NOT COVER WARNING: In order to
avoid overheating, do not cover the heater
with anything, as indicated by the symbol.
This can lead to overheating, fire or electric
shocks. Ensure that the air intake and outlet
vents are not obstructed.
• The appliance is intended only for use indoors,
not for outdoor use or commercial use.
2
• Do not use the appliance anywhere near
easily flammable gases or substances such
as solvents, lacquers, glues, etc. Some of the
internal parts can be hot and could throw
sparks.
• Keep flammable materials at least 100cm away
from the heater. To prevent burns, do not allow
bare skin to come in contact with hot surfaces.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• Never touch the unit with wet hands.
• Check for any obstructions. If you find an
obstruction, turn off the heater using the
power button on the control panel. Allow
the heater to cool completely, then remove
the obstruction. Wait at least 10 minutes,
then turn on the heater and follow the
instructions for use.
COMPONENTS
(See page 1)
1. Pilot light
2. Caution light
3. Power setting knob
4. Thermostat knob
5. Transport handle
6. Air outlet grille
7. Air inlet grille
8. Power cord
OPERATION
(See page 1)
TO OPERATE THE HEATER
• Place the heater on a firm, level, open surface at least 90cm away from any other
object. DO NOT use on an unstable surface such as bedding or deep carpeting.
• With the power setting knob in the off position (
), plug in the heater.
• To operate the heater, push in the power setting knob while turning it clockwise
to the desired position (fig. 1). The pilot light (
) will illuminate. This safety
feature will help ensure that the heater can not be turned on accidentally (fig. 2).
= Fan only
= Medium – 1250W
= High – 2500W
• Turn the thermostat knob clockwise (
) to its highest settings for rapid
warming.
• When the room reaches a comfortable temperature, slowly turn the thermo stat
knob counterclockwise (
) until the heater switches off (the fan goes off). This
is the point at which the thermostat setting equals the room temperature. At
this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.
• Push in and turn the power setting knob to off (
) and unplug the heater when
you are finished using it.
COLD AIR – FAN ONLY OPERATION
• To use the unit as a cold air fan (without heating), turn the power setting knob to
the fan icon ( ) and also turn the thermostat knob to its highest setting (
so the fan will not stop due to a warm ambient temperature (the thermostat
measures the ambient temperature).
NOTE: PROLONGED USE OF THE FAN DURING THE SUMMER SEASON IS NOT
ADVISABLE.
AUTOMATIC ANTI-FROST FUNCTION
The heater is equipped with an automatic anti-frost function. Plug in the
heater. Turn the power setting knob to any of the active settings ( or ). Turn
the thermostat knob counterclockwise to its lowest setting, indicated by the
snowflake icon ( ). As soon as the room temperature is below + 5 °C the heater
will automatically switch on. As the heater will automatically turn on in anti-frost
mode, make sure the heater is not covered or obstructed by any object.
AUTOMATIC SAFETY CUT-OUT
This heater is equipped with an automatic safety cut-out in case parts of the heater
are excessively hot, and this is indicated by the caution light (
). DO NOT operate
the heater while the caution light is on. If the caution light (
) goes on, turn
the heater off immediately and make sure that no objects are on or touching the
heater. If you find an obstruction, remove it and wait at least 10 minutes for the
heater to cool before trying to restart it. If the caution light (
) is still on, see
warranty for instructions.
TIP-OVER SWITCH
The heater is equipped with an automatic tip-over switch that will disable the
heater if it is accidentally tipped over.
IF YOUR HEATER FAILS TO OPERATE:
• Check for and remove any obstructions.
• Check if the heater is in the standing position.
• Check if the heater is plugged in. Also check if the power socket is working (e.g.
plug in a different working electrical device).
• Make sure that the thermostat is not set too low. With the power setting knob
set to one of the active settings ( , or ) turn the thermostat knob clockwise
until the heater turns on again (fan turns on).
• If the heater still does not work, consult the warranty for further instructions.
CLEANING
We recommend you to clean the appliance twice a year (or before if you notice
performance to be impaired) with a vacuum cleaner.
1. Unplug the unit.
2. Allow it to cool down for 20 minutes.
3. Use a vacuum cleaner to suck out dust and dirt from both grilles.
MAINTENANCE
In the event of overheating, the safety system will automatically turn off the
heating elements and/or the motor, if any. If this happens please remove any
obstacles to the air outlet grille and clean the unit as indicated under cleaning
instructions.
ENGLISH GB
DISPOSAL
This appliance complies with EU legislation 2012/19/EU on end of life
),
recycling. Products showing the 'Crossed Through' wheeled bin symbol on
either the rating label, gift box or instructions must be recycled separately
from household waste at the end of their useful life.
Please DO NOT dispose of appliance in normal household waste. Your
local appliance retailer may operate a 'take-back' scheme when you are ready
to purchase a replacement product, alternatively contact your local government
authority for further help and advice on where to take your appliance for recycling.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes responsibility for the correct use
and care of this Kaz product according to these user instructions. The purchaser
or user must himself or herself decide when and for how long this Kaz product is
in use.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT, PLEASE OBSERVE
THE INSTRUCTIONS IN THE GUARANTEE CONDITIONS. DO NOT ATTEMPT TO
OPEN OR REPAIR THE KAZ PRODUCT YOURSELF, AS THIS COULD LEAD TO
TERMINATION OF THE GUARANTEE AND CAUSE DAMAGE TO PERSONS AND
PROPERTY.
This product carries the CE mark and is manufactured in conformity with the
Electromagnetic Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and
the RoHS Directive 2011/65/EU.
Technical modifications reserved
CZ2104EV
220-240V ~ 50Hz
2200W - 2500W
This product is only suitable for
well-insulated spaces or occasional use.
3
Advertisement
