Advertisement
Functions
BEFORE FIRST USE
Remove any promotional material and
packaging from the heated throw.
The poly bag is reusable and can be kept for
safely storing the heated throw when it is not
in use.
The controller can be found unattached and
wrapped inside the throw.
NOTE
The heated throw is designed to be reversible.
Heat will generate equally from either side of
the throw.
TO CONNECT THE CONTROLLER
The heated throw has a detachable controller
which allows the throw to be machine
washable.
Ensure the heated throw power/heat button is
in the off position and not pressed and that the
unit is not connected to a power supply.
To connect the controller, insert the controller
plug found at the end of the power cord to
the controller connector on the throw. Ensure
the locking clips align with the controller
connector.
10
TO DETACH THE CONTROLLER
Press and hold down the locking clips. Pull the
controller plug out of the controller connector.
OPERATING THE HEATED THROW
Ensure the heated throw power/heat setting
button is in the off position and not pressed.
Plug the power cord into a 230V or 240V
power outlet and switch the power on.
Press the power/heat settings button once to
turn the heated throw on.
ADJUSTING THE TEMPERATURE
The three heat settings allow you to choose
the right setting for you depending on your
personal comfort.
Adjust the heat temperature by pressing the
power/heat setting button until the desired
indicator light illuminates:
LOW heat setting
– orange coloured LED indicator light
MEDIUM heat setting
– blue coloured LED indicator light
HIGH heat setting
– green coloured LED indicator light
NOTE
The heated throw will take 40 minutes to reach
the desired temperature, however you will start
feeling warm after 15-20 minutes.
Advertisement
