Appendix; Specifications; Fcc And Other Information - Panasonic KX-HNC710 Installation Manual

Specifications

R Frequency range
Wireless LAN:
2.412 GHz – 2.462 GHz (channels 1 – 11)
R RF transmission power
Wireless LAN:
100 mW (peak transmission power)
R Power source
*1
5.0 V, 1.0 A
R Battery performance
Operating time: 7 hours
Approx. 3 months (when used 5 minutes a
*2
day)
R Operating conditions
-20 °C – 50 °C (-4 °F – 122 °F)
up to 90 % relative air humidity
(non-condensing)
R Image sensor
1.0 megapixel CMOS
R Minimum illuminance required
*3
IR-LED: 0 lx
White LED: 1 lx
R Focal length
Fixed 0.2 m (0.7 feet) – infinity
R Angular field of view (camera angle)
172°
R Motion detection method
Pyroelectric infrared sensor (PIR sensor)
and visual sensor
R PIR sensor detection range (when the
surrounding temperature is approx.
25 °C (77 °F))
Horizontal: 170°
Vertical: 19.1°
Detection range: 6 m (19 feet 8 inches)
For assistance, please visit http://shop.panasonic.com/support
R Visual sensor detection range
Horizontal: 150°
Vertical: 85°
R IP rating
*4
IP65
R Dimensions (height × width × depth)
Approx. 98 mm ´ 71 mm ´ 94 mm
inches ´ 2
7 13
(3 / /
8 16
11 *5
3 / inches)
16
R Mass (weight)
Approx. 490 g (1.08 lb)
*1 Only when charging.
*2 Battery performance changes depending
on the surrounding temperature,
frequency of use, and the actual usage
environment. For more information, refer
to the User's Guide (page 20).
*3 The infrared LEDs that surround the
camera lens will illuminate in low-light
conditions.
*4 Water resistance is only assured if the
camera is installed correctly according to
the instructions in the Installation Guide,
and appropriate water protection
measures are taken.
*5 Including the wall mounting adaptor.

FCC and other information

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including

Appendix

inches ´
*5
21