Sharp PN-ZB03H Operation Manual

Operation Manual
Applicable models LCD MONITOR
(as of May 2016) PN-R556/PN-R496/PN-R426
Available models differ according to region.
CAN ICES-3 (A) / NMB-3 (A)
•
THaNk yOu fOR PuRcHasiNg a sHaRP PRODucT.
Before using the product, please be sure to read this operation manual carefully. In particular, be sure to read the
section "To ensure safe and correct use". After reading the manual, keep it in a convenient location where it can be
accessed at any time.
As for how to use the product, refer to the operation manual of the LCD MONITOR.
TiPs
- This product was shipped after strict quality control and inspection; however, if breakage or a malfunction should be found, contact your SHARP dealer
or your nearest customer contact.
- Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other
malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.
- This product and its accessories may be upgraded without advance notice.
IMPORTANT:
To aid reporting in case of loss or theft, please record the product's model and
serial numbers in the space provided.
The numbers are located on the product.
WaRNiNg:
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WaRNiNg:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB terminal, HDBaseT terminal.
This operation manual and the product use various displays and labels to ensure safe use. Ignoring these displays and labels and incorrectly using the
product could have results as classified below.
Please read the following warning symbol information before reading the rest of this section, and be sure to strictly observe all instructions.
Warning:
Not following these instructions could result in death or serious injury.
• Ask your SHARP dealer or qualified service person for the attachment/detachment of this product.
Attachment/detachment of this product by the customer may result in electric shock or injury.
• Never try to modify, disassemble, or repair this product.
Doing so may result in fire, electric shock, or injury.
• Only use the accessories with specified models.
Failure to do so may result in fire.
HDBaseT Receiver Board
Model No.:
Serial No.:
To ensure safe and correct use
PN-ZB03H
CINSE1411MP51 (1)
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY