Chapter 6. Adjustment Adjustment - Sharp LC-60LE360X Service Manual

CHAPTER 6.
ADJUSTMENT
[1] ADJUSTMENT
1. Entering and cancel the adjustment process mode
1) While holding down the INPUT and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. ("K" standing for inspec-
tion process mode is displayed on the upper left position of the screen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode screen appears.)
3) To cancel it, turn off the power using the Power switch or remote control.
2. Remote controller key operation and description of display in adjustment process mode.
1. key operation
Remote controller key
CH ( / )
VOL (+ / –)
Cursor ( / )
Cursor ( / )
INPUT button on remote con-
troller
ENTER
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
3. So ware upgrading
1) Make sure LCD TV is on.
2) Insert USB device to the USB terminal at the LCD TV.
(Make sure the latest software is installed in the USB device.)
3) Use below menu procedure to start upgrading software version :
For LC-60LE350X / LC-70LE350X
I Option
- Menu System data
- Are you sure? Yes
II
4) A few second later, the software upgrading will start automatically.
So ware Update (USB)
5) Software is successfully installed when the following appears at the end of the process.
So ware Update (USB)
100%
6) Once updating completed, LCD TV will be automatically off and again, after few seconds, automatically restart.
7) Menu S etup Identification
Main unit key
CH ( / )
VOL (+ / –)
——————
——————
INPUT button
————
USB data trans
1%
Changing channel (UP/DOWN)
Changing volume (UP/DOWN)
Turning a page (PREVIOUS/NEXT)
Changing a selected line setting (+10/-10)
Input source switching (toggle switching)
ATV-DTV-HDMI1-HDMI2-HDMI3-INPUT4-INPUT5-PC-USB
———
6 – 1
LC-60/70LE360X
Function