Plug In The Tv And Turn It On; Put Batteries In The Remote; Use The Remote Control To Complete The Initial Setup - RCA 20F524T User Manual

Plug in the TV and Turn It On

Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into
the outlet. Press ON•OFF on the remote, or press POWER on the TV's front panel.

Put Batteries in the Remote

• Remove the battery compartment cover from the back of the remote by pushing down
and sliding off the cover.
• Insert 2 fresh "AA" batteries. Make sure the polarities (+ and -) are aligned correctly to the
diagram inside the battery compartment.
• Replace the cover.
Note: If you won't need to use your remote for a long period of time, remove the batteries to
avoid damage due to possible leakage.
+•? ABC DEF
GHI JKL MNO
TUV
PQRS WXYZ
DIG•ANA
CH LIST
GUIDE
Chapter 1
Use the Remote Control to Complete
the Initial Setup
The technical term is "Navigation"- how you move through the on-screen
ON•OFF
menus. The method is the same throughout the menu screens: highlight
button
your choice and select it.
To highlight a menu item, press the arrow buttons on the remote to
highlight one of the items listed on the screen. Use the up or down arrow
button to move up or down. Use the right or left arrow button to move
right or left.
To select the item that you've highlighted, press OK.
OK button
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter or a different
color).
Arrow
buttons
Connections & Setup
Continues on next page...
1