Miele ProLine CSDA 1010 Operating And Installation Instructions page 34

Installation
 Hold the spacer bar for the other side
underneath the top of the downdraft
extractor. Ensure the spacer bar is
installed with the marking at the front
of the cut-out.
 If the exhaust ducting is to run
downwards, the required bend should
be attached to the exhaust
connection before installation if
possible.
Flat ducting and accessories can be
obtained from retail outlets.
34
 Feed the mains connection cable
down through the cut-out.
 Tilt and lower the downdraft extractor
into the cut-out and hook it onto the
spacer bar.
 Press the downdraft extractor onto
the spacer bar, align it and secure it
to the housing unit with the fixing
plate.