Panasonic CF-52 Series Supplementary Instructions Manual page 4

Description of Parts
Using the Wireless Switch
1
Slide the wireless switch (A) to turn
on/off the wireless devices.
 The Wireless Switch Utility icon on the notifica-
tion area:
: All or any of the wireless devices is (are)
on.
: All of the wireless devices are off.
: (gray out) All of the wireless devices are
disabled in the Setup Utility.
 When you are using all or any of wireless LAN, Bluetooth and HSDPA/UMTS
modem, you can turn them on/off together or separately using Wireless Switch
Utility.
For further information,
Enabling Wireless Communication".
NOTE
 To use wireless communication, set the wireless device setting ([Wireless LAN]
/ [Bluetooth] / [Wireless WAN]) to [Enabled] (default) in the [Advanced] menu
of the Setup Utility.
 It may take some time to turn off wireless communication after switching the
wireless switch to off.
 Do not turn on/off the switch repeatedly at too short intervals.
 Do not restart, log off, or enter standby or hibernation immediately after turning
on/off the switch.
 Do not turn on/off the switch while Windows is starting up.
 When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the
Setup Utility, the Wireless Switch Utility icon will not appear in the notification
area. All wireless equipment (Wireless LAN, Bluetooth, HSDPA/UMTS) will
remain ready irrespective of the wireless switch setting.
To check the wireless communication status
Place the cursor over the Wireless Switch Utility icon (
cation area. A tooltip appears.
4
Reference Manual for the computer "Disabling/
or ) on the notifi-