Appendix; Specifications; Xi. Appendix - Canon imageprograf IPF6400S Service Manual

XI.

Appendix

Note: All Specifications are subject to change without notice.
A.

Specifications

Table 14 - imagePROGRAF iPF6400S Specifications
Type
Media feed system
Media Loading
Capacity
Delivery method
Delivery capacity
Cutter
Media width for borderless printing
Maxmimum
Media size
Print Assurance
Area
Printable Area
Paper Thickness
Detection Function
Self-diagnostic Function
Printer Language
Memory
imagePROGRAF iPF6400S Service Guide
Item
Bubble jet printer
Roll paper/ Cut sheet (Manual switching)
One (1) roll
Outer diameter: Approximately 150mm or less
Roll paper
2-inch (standard) /3-inch (standard)
Manual feed (front) One (1) sheet
Face-up delivery towards the front
One (1) sheet
Automatic (Round blade), self-propelled
Approximately 10" (254mm), B4 (257mm), 14" (356mm),
16" (407mm), A2 (420mm), A2+/17" (432mm), B2 (515mm),
A1 (594mm), 24" (610mm)
Roll paper: width Approximately 203mm to 610mm
Roll paper: length Approximately 18m (depending on OS and application)
Cut sheet paper: width Approximately 203mm to 610mm
Cut sheet paper:
Approximately 1.6m
length
Margin of leading edge: Approximately 20mm,
Roll paper Margin of trailing edge: Approximately 5mm,
Margin of left and right edges: Approximately 5mm
Margin of leading edge: Approximately 20mm
Cut sheet paper Margin of trailing edge: Approximately 23mm,
Margin of left and right edges: Approximately 5mm
Margin of leading edge: Approximately 3mm
Margin of trailing edge: Approximately 3mm,
Margin of left and right edges: Approximately 3mm
Roll paper
[Without borders] Margin of leading edge: 0mm
Margin of trailing edge: Approximately 0mm
Margin of left and right edges: Approximately 0mm
Margin of leading edge: Approximately 3mm
Manual feed (front) Margin of trailing edge: Approximately 3mm
Margin of left and right edges: Approximately 3mm
Approximately 0.07mm to 0.8mm
No paper, leading edge/trailing edge of paper, paper
width/skew, paper slip, purge motor home position, carriage
position, head existence, remaining amount of ink, ink tank
existence, waste ink full, head overheat, cover open, roll
cassette open/close, mist fan lock, cutter position, ink
supply valve open/close, non-ejection of ink
LED flashes and lights up on the operation panel, and
displays an error on LCD.
GARO (Graphic Arts Language with Raster Operation)
256MB
imagePROGRAF iPF6400S Service Guide
Specifications
September 2013
Page 35