Controlling Applications On Your Smartphone - Mirrorlink; Enjoying Different Sources In Front And Rear; Zone × Zone; Changing The Color Of Buttons -Dynamic Color Illuminator - Sony XAV-601BT Operating Instructions Manual

Controlling applications on your
smartphone — MirrorLink™
This function duplicates the smartphone's display
on the in-car display, so you can control applications
on your smartphone with the bigger screen.
Only a smartphone compatible with the
MirrorLink™ function can be used.
1
Connect your smartphone and the unit
via USB cable.
2
Press (HOME), then touch
"MirrorLink™."
The smartphone's display appears on the in-
car display.
Touch and control applications in the same
way as you do on your smartphone.
Note
For your safety, when the parking brake is not
engaged, some smartphone screen content may not
be displayed on AVC.
Enjoying different sources in
front and rear — Zone × Zone
You can simultaneously enjoy different sources
in the front and rear of the car.
Selectable sources for this unit (front) and the
rear monitor (rear) are indicated below.
Front: Any source.
Rear: Disc inserted in this unit.
1
Press (HOME) on the main unit.
2
Touch "ZONE × ZONE" to activate
Zone × Zone.
To operate the source in the front, use the
touch panel and buttons on the main unit.
To operate the source in the rear, use the
remote commander.
Tip
You can also activate/deactivate Zone × Zone by
pressing (Z x Z) on the remote commander.
To deactivate Zone × Zone
Touch "ZONE × ZONE" again in the HOME
menu.
Notes
• Once (SOURCE/OFF) on the main unit or remote
commander is pressed, Zone × Zone is deactivated.
• While Zone × Zone is activated, the following buttons
on the remote commander become inactive:
(SRC), (MODE), (ATT), (VOL) +/–, (CLEAR),
number buttons.
• While Zone × Zone is activated, you can only
operate rear DVD playback by the remote
commander.
• While Zone × Zone is activated, the following are
deactivated.
– EQ7 (page 41)
– Balance/Fader/Subwoofer (page 49)
– Intelligent Time Alignment (page 42)
– CSO (page 43)
– HPF, LPF (page 50)
– Rear Bass Enhancer (page 43)
Changing the color of buttons
—Dynamic Color Illuminator
Dynamic Color Illuminator allows you to change
the color of the buttons on the main unit to match
the car's interior.
You can select from 12 preset colors, customized
color and 5 preset patterns.
x Preset colors
"Red," "Amber," "Medium Amber," "Yellow,"
"White," "Light Green," "Green," "Light Blue,"
"Sky Blue," "Blue," "Purple," "Pink."
x Preset patterns
"Rainbow," "Ocean," "Sunset," "Forest,"
"Random."
1
Press (HOME), then touch "Settings."
2
Touch , and move the scrollbar up
and down, then touch "Key
Illumination."
3
Move the scrollbar up and down to
select the desired preset color, then
press it.
Customizing the button color —
Custom Color
You can register a customized color for the
buttons.
1
Press (HOME), then touch "Settings."
2
Touch , and move the scrollbar up
and down, then touch "Key
Illumination."
3
Move the scrollbar up and down to
select "Custom," then press "Tune >."
4
Move the scrollbar left and right or
press +/– to adjust the color range of
"R" (red), "G" (green), or "B" (blue).
Adjustable color range: "0" – "63."
You can set the color while observing the
button illumination.
33