9. Click Submit to enable the settings.
Managing user access
Figure 42. User access settings
Note: This procedure is optional.
Add, modify, or remove users with the following information:
v Select action
– Add - To add new users.
- Enter the user name and password into the dialog box and assign the user's role.
Figure 43. Add User dialog box
- Click Submit to save the new user, Cancel to remove the user, or Clear to remove the information
and start over.
– Modify - To change the selected user's access role or password.
– Remove - To delete the selected user from the system.
v User Name - The user name of a registered user.
v Role - The user access level for the registered user.
– Users are allowed to monitor the library, but not complete actions that affect the physical library.
– Superusers are allowed to operate the physical and logical library, but not complete actions that
affect the library configuration.
Installation and configuration
43