Powering On/Off (On-Off/End/Home Key); Powering On (Emergency Button); Powering On With Transmit Inhibit (Txi) Active - Motorola MTH800 Feature User Manual

Powering On/Off (On-Off/End/Home Key)

To power
self-check and registration routine. After successful
registration, the MTH800 is in service.
To power
the
Powering Off
The terminal powers On and Off without visible and audible
notification if Covert Mode is activated. (Refer to "Covert Mode"
on page 34.)

Powering On (Emergency Button)

Press and hold the Emergency button to power
The MTH800 will power
standard mode (as programmed).

Powering On with Transmit Inhibit (TXI) Active

Transmit Inhibit is a feature allowing you to switch off
transmission before entering a Radio-Frequency (RF)
sensitive area. To activate this feature, press
More...> Networks > TXI Mode > Activate
The TXI Mode remains active at power
whether to leave the TXI Mode
12
, press and hold
On
press and hold
Off,
message is displayed.
On
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the
MTH800 to transmit immediately. The
MTH800 must NOT be within the RF
sensitive area when entering Emergency
Operation.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.
. Your MTH800 performs a
. You will hear a beep and
in Emergency Operation or in
.
. You will be asked
On
or not.
On
.
On
and select