Removing The Oil Pan; Checking The Oil Strainer; Installing The Oil Pan - Yamaha Tracer MT09TRAH 2017 Service Manual

EAS31068

REMOVING THE OIL PAN

1. Remove:
• Oil level switch "1"
• Oil pan "2"
• Oil pan gasket
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.
2
EAS31069

CHECKING THE OIL STRAINER

1. Check:
• Oil strainer "1"
Damage  Replace.
Contaminants  Clean with solvent.
EAS31070

INSTALLING THE OIL PAN

1. Install:
• Oil pan gasket
New
• Oil pan "1"
Oil pan bolt
10 N·m (1.0 kgf·m, 7.2 lb·ft)
• Oil level switch "2"
Oil level switch bolt
10 N·m (1.0 kgf·m, 7.2 lb·ft)
• Engine oil drain bolt "3"
Engine oil drain bolt
43 N·m (4.3 kgf·m, 31 lb·ft)
1
1
EWA12820
WARNING
Always use new copper washers.
TIP
• Tighten the oil pan bolts in stages and in a
crisscross pattern.
• Lubricate the oil level switch O-ring with lithi-
um-soap-based grease.
1
5-56
OIL PAN
3
2