To Print By Selecting Still Images And Number Of Prints; To Reset The Number Of Prints; Initialising A Memory Card - JVC GR-D820EK Instructions Manual

30
EN
D.S.C. Recording & Playback
GR-D860
To Print By Selecting Still Images
And Number Of Prints
1 1
Perform steps 1 1
1 1
1 1
Images (One Print For Each)" (
2 2
2 2 Select "CURRENT", press SET. The DPOF
screen appears.
DPOF
SHEETS
RETURN
3 3
Press or to select the desired file.
3 3
Press or to select the number
4 4
4 4
indication (00), and press SET.
5 5
5 5
Select the number of prints by pressing
to increase the number, or
the number, and press SET.
DPOF
SHEETS
● Repeat steps 3 3
3 3
desired number of prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the
image again and change the number.
6 6 Select "RETURN", press SET. The
6 6
"SAVE?" appears.
DPOF
SAVE?
EXECUTE
CANCEL
● If you did not change any settings in step
3 3 5 5
3 3 5 5
–
through, the
reappears.
Select "EXECUTE", press SET.
7 7
7 7
● To cancel selection, select "CANCEL".
– in "To Print All Still
4 4
4 4
29).
0 1
to decrease
0 1
5 5
5 5
–
through for the
DPOF
Menu

To Reset The Number Of Prints

1 1 Perform steps
1 1
1 1
1 1
Images (One Print For Each)" (
2 2
2 2
Select "RESET", press SET. The DPOF
screen appears.
3 3
Select "EXECUTE", press SET.
3 3
● To cancel selection, select "RETURN".
● The number of prints is reset to 0 for all still
images.
Caution:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
Note:
When the image is printed from the printer, a black
bar appears at the bottom of the screen. This is
not a malfunction. By recording with "DIS"
deactivated ( 32) this can be avoided.

Initialising A Memory Card

You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 1 Perform steps 1 1
1 1
1 1
27)
Of Images" (
2 2
2 2 Press MENU.
3 3
3 3 Select "MEMORY CARD", (
4 4 Select "FORMAT", press SET.
4 4
The FORMAT screen appears.
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL
5 5
5 5
Select "EXECUTE", press SET. The
memory card is initialised.
● When initialisation is finished, "NO IMAGES
STORED" appears.
● To cancel initialisation, select "CANCEL".
– in "To Print All Still
4 4
4 4
29).
– 3 3 in
"Normal Playback
3 3
.
).