Operations In The Misc >Snapshot Menu On A Switcher Bank - Sony MVS-8000X User Manual

Operations in the Misc >Snapshot
Menu on a Switcher Bank
To limit snapshot settings to the M/E or PGM/PST banks,
use the Misc menu on each bank.
This section describes the operation on the M/E-1 bank as
an example.
Recalling a snapshot
1
Open the M/E-1 >Misc >Snapshot menu (1177).
2
As required, change the bank.
Press [Bank Sel], and enter a bank number in the
numeric keypad window.
3
Press the button for the number or name you want to
recall.
The snapshot is recalled, and the selected button is lit
green.
Saving a snapshot
1
Open the M/E-1 >Misc >Snapshot menu (1177).
2
Set the state you want to save as a snapshot.
3
Press [Store].
4
As required, change the bank.
Press [Bank Sel], and enter a bank number in the
numeric keypad window.
5
Press the button for the number or name you want to
save.
Adding attributes to a snapshot
You can add attributes to a snapshot whose button is lit
green in the M/E-1 >Misc >Snapshot menu (1177).
1
To add the cross-point hold attribute, select the target
bus in the <Attribute Xpt Hold> group.
Note
To add key disable to the cross-point hold attribute
requires a setting in the Setup menu.
For details, see "Setting the operation mode of the key
bus [XPT HOLD] button" (page 449).
2
Select the following attributes in the <Attribute>
group as required.
Effect Dissolve: Add the effect dissolve attribute.
Auto Transition: Add the auto transition attribute.
GPI Output: Add the GPI output attribute. Set the
GPI number using the parameter.
Deleting a snapshot
1
In the M/E-1 >Misc >Snapshot menu (1177), press
[Delete].
2
As required, change the bank.
Press [Bank Sel], and enter a bank number in the
numeric keypad window.
3
Press the button for the number or name you want to
delete.
Renaming a snapshot register
1
In the M/E-1 >Misc >Snapshot menu (1177), press
[Rename].
2
As required, change the bank.
Press [Bank Sel], and enter a bank number in the
numeric keypad window.
3
Press the number or name button for the name you
want to change.
4
Enter a new name using the keyboard window, and
press [Enter].
340