Checking The Configuration - Huawei AR530 Series Configuration Manual

Industrial switch router
Hide thumbs Also See for AR530 Series:
Table of Contents

Advertisement

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Device Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run the following command as required.
l Run:
l Run:
By default, the device does not output logs to a log host.
The device can output logs to eight log hosts (IPv4 and IPv6 hosts) to implement backup among
log hosts.
Step 3 Run:
info-center source { module-name | default } channel { channel-number | channel-
name } log { state { off | on } | level severity }
A rule for outputting logs to a channel is set.
By default, channel 2 is enabled to output logs and the lowest log severity is informational.
Step 4 (Optional) Run:
info-center loghost source interface-type interface-number
The source interface used by the device to send messages to a log host is specified.
By default, the source interface for a device to send messages to a log host is the actual interface
that sends the messages.
After the source interface is specified, the log host determines the device that sends messages.
The log host then can easily retrieve received messages.
----End

3.5.1.10 Checking the Configuration

Procedure
l
l
l
Issue 01 (2014-11-30)
info-center loghost ip-address [ channel { channel-number | channel-name } |
facility local-number | { language language-name | binary [ port ] } | { vpn-
instance vpn-instance-name | public-net } ]
The device is configured to output logs to the IPv4 log host.
info-center loghost ipv6 ipv6-address [ channel { channel-number | channel-
name } | facility local-number | { language language-name | binary [ port ] } ]
*
The device is configured to output logs to the IPv6 log host.
Run the display channel [ channel-number | channel-name ] command to view the channel
configuration.
Run the display info-center filter-id [ id | bymodule-alias modname alias ] command to
view information filtered by the information center.
Run the display info-center logfile path command to check the path where log files are
saved.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information Center Configuration
*
*
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar550 series

Table of Contents