Installing the software
►
During installation, follow the instructions on screen.
►
Consult the operating system manual if there is anything unclear about the requested input
data.
Further information about the system, drivers, utilities, and updates can be found on the
i
"Drivers & Utilities" DVD supplied.
Connecting external devices
Read the documentation on the external device before connecting it.
!
With the exception of USB devices, always remove all power plugs before connecting
external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting cables
►
Turn off all power and equipment switches.
►
Remove all power plugs from the grounded mains outlets.
►
Plug all cables into the device and peripherals. You must observe the information provided in
the "Important notes" chapter.
►
Plug all data communication cables into the utility sockets.
►
Plug all power cables into the grounded mains outlets.
Disconnecting cables
►
Turn off all power and equipment switches.
►
Remove all power plugs from the grounded mains outlets.
►
Unplug all data communication cables from the utility sockets.
►
Unplug all cables from the device and peripherals.
USB devices are hot-pluggable. This means you can connect and disconnect devices
i
while your operating system is running.
Additional information can be found in the "Connecting external devices to the USB ports"
section and in the documentation for the USB devices.
A26361-K1009-Z120-1-7619, edition 4
Preparing for use
13