Table of Contents
Advertisement
Initial Setup
4
Selecting the Input Source
1. Press the INPUT button on the remote control to display the
Input source list.
2. Press the
buttons to select the input source that you
want: Digital TV / Analogue TV / HDMI 1 / HDMI 2 / HDMI 3 /
AV / SCART / YPbPr / USB.
3. Press the OK button to confirm your selection. If you do not
press the OK button to confirm, the TV will automatically
confirm the selected input source within 4 seconds.
Alternative
Press the MENU button to display the main menu. Press
the
then press the OK button. Press the
select the input source that you want, and then press
the OK button to confirm.
Press the TV.RD button to switch to TV / digital radio
channels directly.
Channel Selection
Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
•
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
•
If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 40 for details on Channel Lock).
•
Press the FAV button to view the Favourite List. Then use the
button to view the selected channel (refer to page 32 for details on Channel Edit).
•
Press the
button to return to the previously viewed channel.
Listening to the Radio (Radio Mode)
•
In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
•
Press the CH + / – buttons on the remote control repeatedly to change the radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to listen to the selected station.
Press the GUIDE button to see all the stations in the Programme Guide (refer to page 49 for details on EPG).
•
Display Channel Information
Press the i button to view the current information.
•
Volume Adjustment
Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
•
•
If you wish to switch the sound off, press the
the VOL – button, you will see the volume level reduce, but you won't hear anything at the moment. To listen to your TV at
the new lower level, press the
26
buttons to select the SOURCES menu and
button again or VOL + button.
Digital TV
Analogue TV
HDMI 1
HDMI 2
HDMI 3
OK
buttons to
buttons to highlight and select the channel.
buttons to highlight and select the channel. Press the OK
buttons to highlight and select the station.
button. You can turn the volume down while your TV is in mute mode. Press
Input Source
D
AV
SCART
A
YPbPr
USB
Move
Select
EXIT
Exit
OK
Input Source
Move
Select
EXIT
Exit
Hide quick links:
Advertisement
Table of Contents
