Technical Specification And Service Hints - Philips HDD084 Service Manual

1.0 TECHNICAL SPECIFICATION and SERVICE HINTS

General
Dimensions (WxLx H) :
Weight :
Output power :
Frequency response :
Equalizer :
Hard disk :
Capacity :
Display :
Backlight :
Battery :
Battery life time:
File transfer rate using
USB :
Battery charging current
Maximum charging time :
Battery cutoff voltage:
Connections:
Battery level detection
Detection Level
4-step to 3-step voltage
3-step to 2-step voltage
2-step to 1-step voltage
Force Power Off voltage
Current consumption
DC-IN SUPPLY (3.8V)
Battery Charging Current
BATT. SUPPLY (3.4V)
Power Off
Idle with LCD Backlight on
Playback without HDD reading
Playback with HDD reading
File transfer using USB1.1
Headphone out (headphone output load 2x16 ohm)
Maximum output power :
Frequency response :
SNR (A-wght) :
THD (1kHz) :
Left-Right Channel
Separation :
Left-Right Channel
Balance :
53 x 86 x 16.7 mm (2.1 x 3.4 x
0.7 inches)
78 g (2.8 oz)
2 x 5 mW (16 ohm)
20-20 000 Hz
5 band DSP controlled
1,0" micro HDD
3GB
Black/White
: 96 x 64 pixels
White Led
640 mAh Li-ion internal
rechargeable battery
>9hr
800kbyte/s
320 -420mA
4hrs
3.4V
Stereo headphone
Mini USB (B-type)
DC charger input
Typ.
3.95V
3,8V
3,7V
3,4V
370mA typ.
<15uA
55mA
45mA
350mA
350mA
1mW
20Hz - 20kHz
>75 dB
0,5% - 1.0%
40dB typ.
0,5dB
Supported playback format
MP3 :
WMA :
Sample rates :
ID3-tag support :
PC Connectivity :
File Transfer
For HDD084
via Windows Media Player 9 or 10 for music playback
or Windows Explorer for general data (music playback
disabled)
For HDD082/HDD085/HDD086
via Windows Media Player 10 for music playback or
Windows Explorer for general data (music playback
disabled)
Firmware and software upgrades
For HDD084
1. Download the latest version of the Device
Manager
http://www.philips.com/support. You may need to
enter your language preference and the model
number e.g.hdd084,
Manager application upgrade file.
2. Double click the downloaded execution file to start
the installation of the Device Manager.
3. Once the installation is completed, connect the
GoGear to the power supply with the AC/DC
adapter.
4. Launch the Device Manager at Start->Programs-
>Philips GoGear HDD->Philips GoGear HDD on
your PC
5. A dialogue box will pop up; click Upgrade to start
the upgrading of the firmware.
disconnect the jukebox during the upgrading
process as this interruption may damage the
firmware!)
6. Follow all screen instructions to complete the
firmware upgrade.
7. The Device Manager will close automatically once
the success message is displayed. Close all
opened application and then safely remove your
GoGear micro jukebox by clicking on the
in your task tray bar. When prompted, "The USB
Mass Storage Device can now be safely removed
from the system", click OK and unplug your micro
jukebox.
8 - 320 Kbps and VBR
32 - 192 Kbps
8, 11.025, 16, 22.050
32, 44.1, 48
Yes
USB
application from
to access the Device
(Please do not
icon