Wx-Ct2030 Transceiver; Wx-C516 Power Transformer; Wx-C1027A Headset; Wx-C550 Speaker Microphone - Panasonic WX-CC2010 Series Operating Instructions Manual

WX-CT2030 Transceiver

#0 Antenna
#1 Power LED Indicator
#2 Center Module Connector

WX-C516 Power Transformer

#3
#4
#3 Mounting Hole
This hole is used for mounting the power transformer
onto the wall plates.
#4 Power Plug
To prevent fire or electrical shock, connect this directly
to a 3-plug grounded receptacle of 120 V AC, 60Hz.
#5 Output terminal (SPARE, AC, AC, GND)
12 V AC, 1 600 mA (UL Listed) is provided at the two
terminals (indicated as "AC") to be used for the center
module.
Caution:
Be sure to connect the wire between the GND
(GROUND) of this terminal and that in the trans-
former terminal on the center module.
To prevent fire or electrical shock, the UL listed
power supply cord (Style SVT) should be used for
the cable for 12 V AC terminal.
#0
#1
#5

WX-C1027A Headset

#9
#2
#6 Earphone
#7 Microphone
#8 Cable Clips
Use these clips to attach the cable to your uniform.
#9 Headset Plug

WX-C550 Speaker Microphone

$0 Input Cord
A pigtail cord is provided for the speaker input. Its
length is approx. 3 meters.
$1 Mounting Bracket
AU-type mounting bracket with screw holes is provid-
ed as a standard accessory with the WX-C550.
#6
#7
#8
$1 $0
13