Hold-Multiplier - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

hold-multiplier

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2406
hold-multiplier number;
[edit protocols lldp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the multiplier used in combination with the advertisement-interval value to
determine the length of time LLDP information is held before it is discarded. The default
value is 4 (or 120 seconds).
Disabled.
number —A number used as a multiplier.
Range: 2 through 10
Default: 4 (or 120 seconds)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2489
Configuring LLDP (CLI Procedure) on page 2344
Understanding 802.1X and LLDP and LLDP-MED on J-EX Series Switches on page 2261